Cat5e Ethernet Cable

How to buy Cat5e cable is the most common question we get. It can be daunting to buy if you’re not sure what to look for in an ethernet cable. Fortunately, it’s easier than you might think if you know what to look out for and where to find it.

In this guide, you’ll learn everything you need to know about buying Cat5e Ethernet cable, how to test it, and how to install it properly so that you can be confident that it will work the way you want it to in your home or business network. Read on to find out. Quick Cash Loan in Dubai will manage your urgent Need

What is CAT5E?

CAT5e cable is a popular type of ethernet cable. It’s an older standard that’s been around since the 1990s. CAT stands for category 5, and ‘E’ refers to the cable’s enhanced quality (and price).

CAT 5 cables were originally for phone lines, but they’re still widely in use today as internet cables. They’re less expensive than newer types of ethernet cables, like CAT 6 or Cat7.

The 1000ft Cat5e cables can support a high-speed data transfer of up to 1100 MBit/s over 100 meters which can go up to almost 10 times. If you run the cable at up to 50 meters, it will support up to 1 GBit/s data transfer speeds.

Choosing the best Category 5E Cables

There are a few different types of 1000ft ethernet cables that you can use for Ethernet LAN networks. The 1000ft Cat5e ethernet cable is the most popular and affordable choice. Choosing the right type of cable is important because they all differ in price, length, and speed. So you must consider the following points when buying Cat5e ethernet cables.

  1. Begin by deciding what length of cable you need. Usually, Cat5e ethernet cables come in bulk lengths of 1000ft which you will need to cut as per your requirements.
  2. Make sure that it is not too long and that the packaging is proper on a wooden spool or easy-pull box. Good packaging will ensure that it doesn’t tangle or end up on the floor.
  3. It should be compatible with RJ45 connectors to plug into your modem, router, ethernet hub, or switch.
  4. Buy Cat5e Cable with copper twisted pair conductors- this cable’s four pairs are 100% pure copper wire so which leaves less chance for data loss and interference.
  5. Get solid copper wire with a thicker insulator- this provides better protection from interference as well as better signal quality when watching movies online or streaming online games.

Cat5e Plenum vs Cat5e Riser

The most important thing you need to know about buying Cat5e ethernet cable is whether you need a Cat5e plenum or riser. The Plenum cable is for air-handling spaces and other public areas, whereas the Cat5e riser cable is for use in vertical runs. Vertical runs are the indoor enclosed spaces such as the inside of walls, the space between floors, and elevator shafts.

Bulk Cat5e Plenum cable offers better fire protection and flame spread ratings, and can also be run outdoors. If you’re unsure of where your cables will be going, consult with a networking engineer before making a decision.

How Much do they Cost?

Ethernet cable is typically priced per foot, meaning that a 100-foot cable will cost more than a 50-foot one. But there are other things to consider as well. For instance, if the cable is shielded, it will cost more as compared to an unshielded one. Similarly, bare copper Cat5e cables provide better protection against interference and crosstalk than CCA cables so they are more expensive.

Additionally, Cat5e cables come in two types: shielded and unshielded. Unshielded cables are cheaper than shielded ones but less resistant to interference from noise like microwaves or fluorescent lights.

What’s the difference between UTP, FTP, and STP?

FTP and STP are less common types of Cat5e ethernet cable, but they can still be useful in certain situations.

FTP (Foil Twisted Pair) is a type of twisted pair cabling that is the same thickness as standard UTP cable, with a foil shield. There are some advantages to using FTP ethernet cable – it can run farther distances than standard UTP and has less interference, but it also costs more.

STP (Shielded Twisted Pair) is another type of twisted pair cabling, with an extra layer of shielding over the wires inside the cable. This type of ethernet cable provides better protection against outside interference and noise, making it suitable for environments where there is a lot of RF or EM radiation present.

Where to Buy?

You can find Cat5e ethernet cable at a hardware store, electronics store, or even a big box store. The prices will vary based on the length of the cable and where you buy it from. Generally, you’ll pay less for shorter cables.

But if you need longer lengths, we recommend buying from an online retailer because they have better prices and more options to choose from.

How to Install Cat5e Ethernet Cable Properly?

There are a few different ways that you can install a 1000ft Cat5e cable.

One way is to drill holes through the drywall and then push the cables through. If you’re tight on space, this method may not be feasible for you.

Another option is using surface connectors that attach directly to the wall with screws or nails. These are great if you’re just looking to get a couple of cables in place without going through a lot of trouble drilling holes or pulling them across your walls.

The last option is similar to the first but instead of drilling holes, it involves going behind the drywall and fishing them out from there. This will require more time and effort but will be less noticeable once completed.


We hope this blog was of help to you and that now you can buy the right Cat5e ethernet cable for your network.