In times working from home has become a necessity due to the pandemic, a blazing-fast and seamless connection has become the need of the hour. Thus, if you have been looking for a way to access a fast internet connection to make your work from home journey more productive, we recommend you to perform Netgear AC750 setup.

Relax! Setting up a Netgear AC750 WiFi router isn’t that difficult. All you need to do is, follow the step-by-step guidelines mentioned in this article. By the time you’re done this post, you’ll surely know how to set up and install a WiFi router in your home. So, let’s get started.

Guidelines to Perform Netgear AC750 Setup Manually

Mentioned below are the instructions that you need to follow in order to set up and install a Netgear AC750 router in your house:

  1. Power On the Netgear Router

The first step in performing Netgear AC750 setup is to configure the hardware. Keep the points given below in mind while configuring the hardware of your device:

  • Place your Netgear router next to the modem.
  • Choose a clean and well-ventilated location to place your Netgear router.
  • Keep your router away from electronic devices, transmitting appliances, reflexive surfaces, metal objects, or any other device that can create interference in the signals of your device.
  • After keeping the above-mentioned points in mind, grab a power cable, and connect the Netgear AC750 router to the power adapter.
  • Now, press the Power button on the AC750 router.
  1. Connect the Router to the Modem

After configuring the hardware of your Netgear AC750 device, create a connection between the router and modem. You are free to connect your devices using an Ethernet cable or a wireless source. The choice is totally yours.

By any chance if you get stuck while trying to connect the Netgear WiFi router to the modem, it is recommended that you get in touch with our highly experienced technical experts right away. They will surely be able to guide in fixing the issue at hand.

  1. Open Up an Internet Browser

Once a proper connection between your WiFi devices is established, switch on your laptop, and open up a web browser on it. You can use Google Chrome, Mozilla Firefox, Microsoft Edge, Apple Safari, etc to log into the WiFi router.

Whatever web browser you use, just make sure that it is updated. Otherwise, you’ll end up getting stuck with various router login issues that had no intention of troubling you in the first place.

  1. Go to the Page

Type in the address bar of your chosen web browser and press the Enter key. Make sure there are no typos while you’re typing the default web address of your Netgear AC750 WiFi router. If being careful doesn’t help you in logging into your router, then we recommend you to make use of the default IP.

For those of you who are doubtful regarding the default IP address of your router, refer to the Netgear manual. You’ll find each and every little detail regarding your WiFi device in there.

  1. Follow the On-Screen Prompts

As soon as you hit Enter, you’ll be taken to the Netgear router login web page. Next, fill in the default username and password of your AC750 router and click on the Log In button to proceed further. The Netgear Genie Setup Wizard will appear on your screen.

Now, walk through the on-screen instructions displayed on the Netgear Genie dashboard to complete performing Netgear AC750 setup.


So, this was all about how to perform Netgear AC750 setup using the manual method. In case you face any issues while trying to set up your WiFi device, don’t hesitate to get in touch with our technical experts.