Is your Netgear Orbi router scaring you by rapidly blinking purple? Well, first of all, you need to take a deep breath! It’s pretty normal for a technical device to flash different color lights if there’s something wrong with it. So, if your Orbi is blinking purple, then it means that your device is facing issues while functioning.
But, worry not! It’s not like this issue doesn’t have a solution. Walk through the solutions mentioned in this post and learn how to get rid of the Orbi purple light issue in no time. But, first, become aware of the reasons that caused it:
Possible Reasons Behind Orbi Purple Light Issue
Outlined below are the possible reasons that might be making your Netgear Orbi router flash purple:
- Your Netgear Orbi router and the existing modem are not properly connected. Probably, that might be because they are connected wirelessly.
- You didn’t perform Netgear Orbi firmware update when it was required.
- Multiple devices are connected to the network of your Netgear Orbi device.
- An issue from the end of your Internet Service Provider can also make your Netgear Orbi router blink purple.
- Sometimes, even long hours of inactivity can cause technical issues like the one that you are facing right now.
- Chances are that your Orbi router and satellite are not synced well.
These were some of the most common reasons why your Netgear Orbi is flashing purple and refusing to work properly. Now, take a step forward and follow the troubleshooting steps mentioned below to fix the issue:
How to Resolve of Netgear Orbi Purple Light Issue?
Solution 1. Update the Firmware
If your Orbi router is not running on an updated firmware, then facing the purple light issue is just the beginning. Therefore, make sure that you update the firmware of your WiFi device to the latest version. In order to update your device, you need to access the Netgear Orbi login page, go to Settings, click on the Firmware Update button, and follow the on-screen steps.
Solution 2. Check Your Internet Connection
A weak internet connection is the root cause behind many technical issues. Chances are that your Orbi is flashing purple because of the same reason. Thus, ensure that your Orbi has access to a seamless internet connection. If needed, get in touch with your Internet Service Provider (ISP). Confirm whether the issue is from the side of your ISP. In case it is, get it fixed immediately.
Solution 3. Disconnect Extra Devices
Sometimes, when too many devices are connected to your Orbi router at the same time, its performance can go down. Therefore, unload your Orbi device a bit by disconnecting the devices which are not in use. Now, check whether the Netgear Orbi purple light issue has been fixed or not. Still no luck? In that case, continue reading.
Solution 4. Let Your Orbi Router Rest
One of the major reasons why your Orbi router is flashing purple might be because it isn’t getting enough time to rest. Our brain takes time off in order to work proficiently, right? In the same way, your Orbi needs some time off too. Thus, it is recommended that you turn off your Orbi device when not in use. Doing so will help your device come back stronger and function without facing any difficulty.
Final Thoughts
Let’s hope that the troubleshooting steps mentioned in this post helped you fix the Netgear Orbi purple light issue. On the off chance, if the issue persists, then perform factory default reset. Doing so will surely help you get rid of the purple light issue.
Note: After restoring your device to the default mode, don’t forget to perform Netgear Orbi setup from scratch.
